Problem Solving using Evolutionary Systems (new posts) http://theprovingground.wikidot.com/forum/c-124633/problem-solving-using-evolutionary-systems Posts in the forum category "Problem Solving using Evolutionary Systems" - Forum for USC Students participating in the Arch 517 Galapagos seminar. Mon, 11 May 2026 17:39:18 +0000 http://theprovingground.wikidot.com/forum/t-341414#post-1099640 Uploading Project: Re: Uploading Project http://theprovingground.wikidot.com/forum/t-341414/uploading-project#post-1099640 Thu, 31 Mar 2011 20:26:08 +0000 simonusc 719989 it isn't that long, but its about half of screen. Sorry I am sure it is my bad. Now I am waiting for the email from vimeo so I can embed it on my page.

I apologize for going to miss the class tonight. I was so looking forward to this review.

]]> http://theprovingground.wikidot.com/forum/t-341414#post-1099454 Uploading Project: Re: Uploading Project http://theprovingground.wikidot.com/forum/t-341414/uploading-project#post-1099454 Thu, 31 Mar 2011 19:17:20 +0000 Archinate 441292 Wow, that's huge! How long is it? You can also try changing your screen resolution to be smaller and then record that…

If if it really long, You can also set it to capture 1 frame every couple of seconds for a time lapse effect. It'll make the ecotect analysis demo seem much quicker in the video.

]]> http://theprovingground.wikidot.com/forum/t-341414#post-1099343 Uploading Project: Re: Uploading Project http://theprovingground.wikidot.com/forum/t-341414/uploading-project#post-1099343 Thu, 31 Mar 2011 18:39:29 +0000 simonusc 719989 I am uploading mine now…its taking so long. 480MB taking little over an hour. I've already select the lower quality. maybe i should have make the screen much smaller too. -S

]]> http://theprovingground.wikidot.com/forum/t-339863#post-1099229 sphere cloud in 2D?: Re: sphere cloud in 2D? http://theprovingground.wikidot.com/forum/t-339863/sphere-cloud-in-2d#post-1099229 Thu, 31 Mar 2011 17:44:22 +0000 simonusc 719989 Thanks Nathan. I played around with it, this is what i have now.
http://theprovingground.wikidot.com/local--files/simon-chiu/TPG_NMILLER_VORONOI_MAP-SKC.ghx
If I want to add one more genes to it, what would you suggest? Thanks.

Simon

]]> http://theprovingground.wikidot.com/forum/t-341636#post-1098938 Vimeo: Re: Vimeo http://theprovingground.wikidot.com/forum/t-341636/vimeo#post-1098938 Thu, 31 Mar 2011 15:14:58 +0000 Won Hee Ko 720016 I just check it! awesome,

Thanks!! :)

]]> http://theprovingground.wikidot.com/forum/t-341636#post-1098440 Vimeo: Re: Vimeo http://theprovingground.wikidot.com/forum/t-341636/vimeo#post-1098440 Thu, 31 Mar 2011 10:12:58 +0000 Mohamed Mansour 459950 Won,

I fixed it for you. I embedded the video code into your page. Check it out!

Best
-Mohamed

]]> http://theprovingground.wikidot.com/forum/t-341636#post-1098380 Vimeo: Vimeo http://theprovingground.wikidot.com/forum/t-341636/vimeo#post-1098380 Thu, 31 Mar 2011 09:38:42 +0000 Won Hee Ko 720016 I updated my page with the final project and uploaded video in vimeo but there is nothing coming out when I click it in vimeo. I tried one more time to upload but it has same issue. Guess this is because it is too big..73MB. Can I directly upload it here? I am worried that it is too big to put here..

Anyway, if it is possible, please review my grasshopper file and let me know if I made any mistake or missed some problems.

Thanks! and See you tomorrow :)

]]> http://theprovingground.wikidot.com/forum/t-335327#post-1098173 TriGrid Help: Re: TriGrid Help http://theprovingground.wikidot.com/forum/t-335327/trigrid-help#post-1098173 Thu, 31 Mar 2011 07:42:37 +0000 Winston Kahn 710765 Well, I've done everything described above aside from getting those edge conditions to divide/subdivide. Many thanks for your extraordinary help along the way Nathan. I'm certainly going to use this for this semester's studio final and beyond as I explore this framing system in other iterations. Have a look at the file and give me some thoughts on how to improve it further. Here's a link to the definition.

5576503644_e61ab749cd.jpg ]]> http://theprovingground.wikidot.com/forum/t-341414#post-1097690 Uploading Project: Re: Uploading Project http://theprovingground.wikidot.com/forum/t-341414/uploading-project#post-1097690 Thu, 31 Mar 2011 04:38:03 +0000 erudius 720015 I uploaded it too. but too slow.

]]> http://theprovingground.wikidot.com/forum/t-341414#post-1097321 Uploading Project: Re: Uploading Project http://theprovingground.wikidot.com/forum/t-341414/uploading-project#post-1097321 Thu, 31 Mar 2011 02:48:11 +0000 erudius 720015 Yes, it is too slow to analyze solar radiation in Ecotect. I just captured several moments that my geometry is changed.

]]> http://theprovingground.wikidot.com/forum/t-341414#post-1097297 Uploading Project: Re: Uploading Project http://theprovingground.wikidot.com/forum/t-341414/uploading-project#post-1097297 Thu, 31 Mar 2011 02:42:11 +0000 Archinate 441292 Looking good… But is it running the solar analysis as part of the system? I am not seeing the usual analysis delay and status bar in ecotect.

Was it just too slow? Maybe you can post an iteration with the solar analysis being computed?

Nate

]]> http://theprovingground.wikidot.com/forum/t-341414#post-1097270 Uploading Project: Uploading Project http://theprovingground.wikidot.com/forum/t-341414/uploading-project#post-1097270 Thu, 31 Mar 2011 02:32:59 +0000 erudius 720015 I posted my final project on my page.

It takes so long time to finish running Galapagos and Ecotect and I captured some process. I'm not sure if my definitions are all correct.

Please review and let me know if my definitions are incorrect and I missed some requirements.

I'm so sorry that I have to miss the last class.
I learned a lot about Grasshopper and Galapagos and I really enjoyed the class.

Thank you very much.

]]> http://theprovingground.wikidot.com/forum/t-341324#post-1097015 *** MUST READ *** FINAL SUBMISSION DISCUSSION THREAD: *** MUST READ *** FINAL SUBMISSION DISCUSSION THREAD http://theprovingground.wikidot.com/forum/t-341324/must-read-final-submission-discussion-thread#post-1097015 Thu, 31 Mar 2011 00:44:38 +0000 Archinate 441292 Class,
As we approach the deadline tomorrow, This thread is for general discussions and questions related to the final submission As you are aware, information on the final submission can be found here

Please follow the format described here.

Some notes:

  1. You must use Vimeo or YouTube to post the video. Please do not upload video files to this wiki as space is limited. Going through these sites will also allow you to embed the video file directly to the wiki page.
  2. Final projects must be submitted on time to this wiki (no later than Thursday 6:00 PM). It will be considered late if it is after that point..
  3. Uless you have already received my pre-approval, all students are expected to attend the discussion review at NBBJ. This is a key part of your participation.
  4. I will be selecting certain projects for discussion tomorrow. I will contact you in advance if I have selected your project. Be prepared to share describe your project to the group.

Please post any general questions about the final submission here (Format, schedule, etc)….

]]> http://theprovingground.wikidot.com/forum/t-340457#post-1096781 Galapagos Problem_Maximize Volumn: Re: Galapagos Problem_Maximize Volumn http://theprovingground.wikidot.com/forum/t-340457/galapagos-problem-maximize-volumn#post-1096781 Wed, 30 Mar 2011 22:52:18 +0000 Suhee Jung 720018 Now I can cacluate the volumn~
Thank you very much!!:)

]]> http://theprovingground.wikidot.com/forum/t-340895#post-1096385 In need of suggestion/help final project: Re: In need of suggestion/help final project http://theprovingground.wikidot.com/forum/t-340895/in-need-of-suggestion-help-final-project#post-1096385 Wed, 30 Mar 2011 20:43:59 +0000 Archinate 441292 You can't edit the desired square area panel as it is receiving information. It is there to show that the areas for each space add up to be greater than the available floor area. 4 panel components control designer areas for each of the 4 program zones. You should edit those to change the areas

I don't know how compatible these two systems are directly… basically the system will need to look something like:

1. A series of points control the Voronoi cells.
2. Each point will have a square area associated with it (the target fitness).
3. You will give Galapagos control over the X and Y position of each individual point The genes).
4. Galapagos will move the points around until the target fitness is achieved.

This, of course, is probably an over simplification of the approach. Give it a shot and post your attempts.

]]> http://theprovingground.wikidot.com/forum/t-340010#post-1096142 Three different objectives and Ecotect: Re: Three different objectives and Ecotect http://theprovingground.wikidot.com/forum/t-340010/three-different-objectives-and-ecotect#post-1096142 Wed, 30 Mar 2011 19:25:15 +0000 Won Hee Ko 720016 Thanks!!
I totally forgot about it. Now the geometry appears in Ecotect :)

]]> http://theprovingground.wikidot.com/forum/t-340457#post-1096022 Galapagos Problem_Maximize Volumn: Re: Galapagos Problem_Maximize Volumn http://theprovingground.wikidot.com/forum/t-340457/galapagos-problem-maximize-volumn#post-1096022 Wed, 30 Mar 2011 18:26:48 +0000 Mohamed Mansour 459950 Here's the file. Download Here I flattened the "b" value for you!

Enjoy
-Mo

]]> http://theprovingground.wikidot.com/forum/t-340457#post-1096010 Galapagos Problem_Maximize Volumn: Re: Galapagos Problem_Maximize Volumn http://theprovingground.wikidot.com/forum/t-340457/galapagos-problem-maximize-volumn#post-1096010 Wed, 30 Mar 2011 18:25:06 +0000 Mohamed Mansour 459950 "Flatten" the "B" in the join component.. It will work!

]]> http://theprovingground.wikidot.com/forum/t-340457#post-1095950 Galapagos Problem_Maximize Volumn: Re: Galapagos Problem_Maximize Volumn http://theprovingground.wikidot.com/forum/t-340457/galapagos-problem-maximize-volumn#post-1095950 Wed, 30 Mar 2011 18:09:19 +0000 Suhee Jung 720018 That's not a red screen. That's a color that I set with a group.
I think it has a problem with calculation of volumn.
The volumn commend always represent orange color, also it doesn't show any number of volumn. Please take a look again. Thank you!~:)

]]> http://theprovingground.wikidot.com/forum/t-340010#post-1095719 Three different objectives and Ecotect: Re: Three different objectives and Ecotect http://theprovingground.wikidot.com/forum/t-340010/three-different-objectives-and-ecotect#post-1095719 Wed, 30 Mar 2011 16:45:53 +0000 Archinate 441292 Be sure you remap ndde binary dll in the "Reference Assemblies" menu. You will also have to specify the file path for the script file…

We did this in class for the other components. you will have to do it again for this component.

]]>